User's Manual

28
Can be scan the memory in a bank. Can be scan the memory in few banks.
Can be selected banks at 10 maxim
1. Hold down the FUNC key and press
the dial knob to set mode and
selected the s09.
2. Selected the BANK by the dial knob.
3. Press the dial knob and returned to
VFO mode.
4. Press the V/M key, and press the
SCAN key to scanning the Memory
bank mode.
5. When change the bank, use the dial
knob.
6. Press the V/M key, while to scan
stop and return the memory mode.
7. Press the V/M key again, return to
VFO mode.
1. Hold down the FUNC key and press
the dial knob to set mode and
selected the s09.
2. Selected the BKLNK by the dial knob.
3. Hold down the FUNC key and selected the
dial knob to bank number.
If you release the FUNC key,
can not be change the bank number.
4. After release the FUNC key to set the bank link.
5. Repeat step 3 to 4 other bank number.