User's Manual

29
This setting used to preset mode. This setting uses to the tone squelch
1. Confirm VFO mode is set.
2. Hold down the FUNC key and
press the MODE key and select
the TSQ.
3. Press the V/M key or press the
dial knob to TSQ mode.
4. Hold down the FUNC key and
press the dial knob to set mode.
5. Selected the s20 by the dial knob.
6. Hold down the FUNC key and
selected the dial knob to tone
frequency
7. Hold down the FUNC key and
press the dial knob to VFO mode.
1. Hold down the FUNC key and
press the BAND UP key to watch
select function.
2. Select the preset mode by the dial
knob.
3. The P icon and memory number are
displayed.
4. select the band of the preset
memory by BAND UP key or BAND
DOWN key