User's Manual

59
8-2-2 SEARCH PAUSE
The search pause parameter determines how long the receiver will remain on an active frequency before
resuming searching even if the frequency is still busy. Search pause helps keep you from having to
manually intervene to force the search to continue or use frequency lockout (pass).
The parameter ranges are off and 1 to 60 seconds. When the parameter is set to off, the receiver
remains on the busy frequency until the received signal disappears or the search frequency is changed.
To set the search pause parameter, perform the following steps:
1. Press the [FUNC] key, and then press the [SCAN] key. The search link screen will appear.
2. Select the bank link group number, and then press the [DOWN] key.
The pause setting screen will appear.
3. Rotate the sub dial to set search pause parameter (between 1 ~ 60 or off). To set search pause to
off (zero), press the [PASS] key or enter “0” from the numeric keypad.
4. To confirm entry, press the [MHz] key. To set other parameters, press the [DOWN] key.
8-2-3 SEARCH DELAY
The search delay parameter affects the time the AR5001D will remain on an active frequency in search
mode once the received signal has disappeared and the squelch is closed. This is particularly useful for
customizing how long the receiver will wait for a reply before continuing to search.
The parameter ranges are off, hold and 0.1 to 9.9 seconds.
To set the search delay parameter, perform the following steps:
1. Press the [FUNC] key, and then press the [SRCH] key. The search link screen will appear.
2. Select the bank link group number, and then press the [DOWN] key twice.
The pause delay screen will appear.