Manual Part 3

127
18-5-1 Recording
While in the record & playback menu select “REC” and
. The LCD will return to its previous display with the legend “REC” in the bottom
left corner of the LCD to show that the RU8200 is active. If the squelch is currently open, recording
will take place immediately, otherwise recording will take place next time the squelch opens.
While recording is in progress, the second line from the bottom of the LCD (usually displaying the
standby frequency in 2VFO mode) changes to a progress bar “REC =====>” indicating that record-
ing is in progress. Once started, the recording process continues for about 20 seconds and the
legend “End” is displayed when the recording process is complete. Once started recording contin-
ues even if the squelch closes but you may the
key half way through a recording to stop it from
recording 20 seconds of nothing! the key
after recording has ended to clear the recording related text
from the LCD.
&Note: RU8200 recording is disabled when the band
scope facility is operational.
18-5-2 Playback
It is assumed that you have already made a recording. While in the record & playback menu select
“PLAY” and . The LCD will return to its previous display with the legend “PLY” in
the bottom left corner of the LCD to show that the RU8200 is active. Playback will start instantly.
While playback is in progress, the second line from the bottom of the LCD (usually displaying the
standby frequency in 2VFO mode) changes to a progress bar “PLY =====>”
indicating that playback is in progress. Once started, the playback process
continues for about 20 seconds and the legend “End” is displayed when the
playback is complete.
You may the key to cancel playback or clear the recording
related text from the LCD.
&Note: No liability in any form will be accepted in respect of
recordings made using the RU8200 option.
18-6 EM8200 optional external extended memory slot
card
The EM8200 enables the whole 1,000 memory channels in 20 banks and 40 program search banks
to be backed up to the EM8200. In fact the EM8200 can hold the entire contents of the AR8200
including environmental operating data and band scope FOUR times in EM8200 locations 0, 1, 2 &
3. It is not necessary to save ALL data, you can specifically choose what data is to be backed up
and to which location.
Section 18-5-1, 18-5-2, 18-6