User`s manual

Remote switch
Now open the AOR Searchlight group using program manager and double-click on the
main program icon (which looks like an AOR radio).
The program will then launch and display a copyright notice before opening it’s main
window if all is well. The software should tune the radio to 145.5 MHz FMN as default.
If your radio does not tune to 145.5 MHz, it may be because you have not configured
AOR Searchlight for the right serial port or baud rate.
Configuring the program
To check the configuration of the program, select the Setup|Communications
menu option and choose the options you require from the dialog that is displayed (see below):
You can choose: the type of radio you are using (either AR-3000 or AR-3000A); the
speed of RS-232 communications; the serial port. Make sure all these settings match your
hardware. In the dialog above, AOR Searchlight has been setup for 4800 baud to an AR-3000A
connected via serial port COM2.
GETTING STARTED
AOR Searchlight User’s Guide 11