User`s manual

AOR Searchlight will store these settings, for use next time the program is run, in the
“SEARCH.INI” initial setting file which is maintained automatically by the program.
Correct operation of the software is only guaranteed at 4800 baud
The Front Panel Window
Once you have the program running and properly configured, you can check that your
radio and computer are working correctly using the front panel window. This contains a dual
VFO display and an array of manually controls for tuning the radio. The front panel window
looks like:
You can select VFO A or VFO B using the A and B push buttons.
To tune the radio to a specific frequency, click the numeric push buttons in the bottom
right corner of the window (C clears and ENT is enter). The mode can be selected using the group
of six radio buttons located in the box below the frequency display (just click on the mode you
want so that there is a dot inside the circle).
Example: To tune to 93 MHz FMW
Click on 9, 3, ENT and select the correct mode by clicking on the FMW radio button with your
mouse
AOR Searchlight User’s Guide 12
GETTING STARTED