User`s manual

Enter an offset (in kHz) and click on OK. If the offset is negative, VFO B is

offset below VFO A. If positive, VFO B is above VFO A.

NOTE: The VFO offset function is intended to be used in

association with VFO tracking.

VFO Tracking

VFO tracking allows you to link the two VFOs together so that the

offset between them kept is constant. Click on the TRACKING check box

so that there is a cross in the box to switch on VFO tracking.

Attenuator

Click on the ATTENUATOR check box to toggle the radio’s attenuator. The

attenuator is on when there is a cross in the check box.

Obtaining Help

There is extensive help information available at all times throughout AOR Searchlight.

There is a help push button in most dialogs which gives you full context sensitive help, or you

can get help from the menu along the top of the AOR Searchlight window.

NOTE: Specific help on using Windows

Help can be obtained by selecting the

Help|Using Help menu option from within AOR Searchlight.

Once you are running Windows

Help, you can read instructions for each feature of the

program as you go along. A full list of the main features of AOR Searchlight is available from the

Help menu of the program. All you need to do is select the option you need from the menu and

read the contents of the help window that appears.

GETTING STARTED

AOR Searchlight User’s Guide 14