User`s manual

The signal level detected at each step is displayed in the form of a graph as the
radio scans, The range of frequencies is determined by the centre frequency and step size you
chose.
You can click on the display to measure frequencies precisely while scanning is in
progress, or you can tune the radio using the cursor once you have stopped scanning. The
following push buttons are provided:
Abort Exit from spectrum analysis and restore the VFO
Exit Exit from spectrum analysis and copy the last scanned
frequency to the VFO
Setup... Alter the spectrum analysis’ parameters
Print... Print the spectrum display
Pause... Pause scanning
Stop Stop scanning but keep the spectrum analysis window
SCANNING MENU OPTIONS
AOR Searchlight User’s Guide 36