Specifications

To return to the search mode, press the MODE switch and REC switch simultaneously three times.

(The operation mode will toggle between the Search mode, Memory mode, SD card mode, and

setting mode.)

5-2-3 Setting mode

There are two (2) setting pages: Setting 1 and Setting 2.

5-2-3-1 Setting 1 screen

Press the MODE switch and REC switch simultaneously

several times (depending on the current operation mode).

(Press the blue button to proceed directly to the settings

2 screen if needed.)

Date and Time: Set current date and time for time stamp.

View Time: Duration of pause time. (Parameter: 1 ~ 50 (seconds), STOP)

Set the view time before resuming search after detecting video signal. If set to

STOP, the AR-STV stops searching once video signal is detected.

Video Polarity: Reverse video polarity (ON/OFF)

• To change each parameter, press the FREQ. switch upward or downward to move the cursor

to the desired position.

• Press the FREQ. switch inward to change the color of the selected parameter in reverse

polarity with green color.

• Press the FREQ. switch upward or downward to change the parameter.

• To confirm entry, press the FREQ. switch inward.

To leave the settings screen, press simultaneously on the blue and red buttons once, then wait 3

seconds.