Specifications

134
Select the “SAVE” option, to toggle between load and save. Next select the EM8200
bank you wish to save using the   keys or main dial (0, 1, 2 or 3). The type of data will already be
default to “ALL-DATA” so no action is required. to start the data save. The legend
“EXT-MEM SAVING !!” will be displayed with the exclamation marks flashing to indicate that saving is in
progress. The save process will take over 20 seconds to complete. Once the save is complete, the
LCD will revert to its previous display (VFO, scan or search etc).
Load ALL-DATA
It is presumed that you have already saved ALL DATA to one of the four EM8200 memory locations.
Make sure that global write protect is not set or the data load will be unsuccessful and no data will be
loaded.
Access the COPY EXT-MEM menu using the key sequence .
Select the “LOAD” option, to toggle between load and save. Next select the EM8200
bank you wish to load using the   keys or main dial (0, 1, 2 or 3). The type of data will already be
default to “ALL-DATA” so no action is required. to start the data load. The legend
“EXT-MEM LOADING !!” will be displayed with the exclamation marks flashing to indicate that loading is
in progress. The load process will take over 20 seconds to complete. Once the load is complete, the
AR8600 will power off/on and the LCD will revert to its previous display (VFO, scan or search etc).
18-7-3 EM8200 ALL-MEM save and load
It is not necessary to save and load all of the data at times when you do not wish your search banks etc
over-written. Instead use ALL-MEM to overwrite all memory banks in one go but to leave the search
banks etc unchanged.
Save ALL-MEM (all memory banks)
Access the COPY EXT-MEM menu using the key sequence .
Select the “SAVE” option, to toggle between load and save. Next select the EM8200
bank you wish to save using the   keys (0, 1, 2 or 3). the  key to move the cursor to the
left of the “ALL-DATA” legend, use the   keys to select “ALL-MEM”.
to start the memory data save. The legend “EXT-MEM SAVING !!” will be displayed
with the exclamation marks flashing to indicate that saving is in progress. The memory save process
will take over 10 seconds to complete. Once the save is complete, the LCD will revert to its previous
display (VFO, scan or search etc).
Load ALL-MEM (all memory banks)
It is presumed that you have already saved memory data to one of the four EM8200 memory locations.
Make sure that global write protect is not set or the data load will be unsuccessful and no data will be
loaded.
Access the COPY EXT-MEM menu using the key sequence .
Select the “LOAD” option, to toggle between load and save. Next select the EM8200
bank you wish to load using the   keys or main dial (0, 1, 2 or 3). the  key to move the
cursor to the left of the “ALL-DATA” legend, use the   keys to select “ALL-MEM”.
Section 18-7-2, 18-7-3