Specifications

86
8-7-5 AUTO STORE
Auto store causes the first 50 active frequencies located during search to be automatically written to
memory bank “J” (channels J00 to J49). If bank “J” is full, auto store will not function.
Note: Memory banks are dynamically configurable so that bank “J” has 50 channels at
default buy may be configured to provide 10, 20, 30, 40, 50, 60, 70, 80, or 90 channels.
Refer to section 5-7 of this manual regarding dynamic memory bank resizing.
Search auto store is configured via the SRCH-GROUP menu. Use the key sequence
to access the “SRCH-GROUP” menu. Use the Õ Ö keys to select the
SRCH-GROUP number between 1 and 9. Ø nine times to display the search environment
parameter of AUTO STORE.
to toggle between OFF and ON (the default is off).
to accept the changes and return to the display prior to accessing the search
environment menu. Alternatively you may move to the next option (DELETE J) by pressing the Ø key.
While searching, the LCD legend “AS” is displayed to indicate that auto store is in operation.
Frequencies closer than ± 10 kHz to a frequency already stored in bank “J” will be ignored, this prevents
the same frequency being stored over and over again. As busy frequencies are located and entered
automatically into memory bank “J”, any associated search bank text comment will also be stored into
memory to help identify from which search bank the frequencies originated.
8-7-6 DELETE bank “J”
To simplify the VFO auto store feature, it is possible to delete the contents of memory bank “J” using this
menu… this allows you to quickly ‘dump’ the unwanted contents of the auto store memory bank “J”
before starting a new search with the auto store feature enabled.
‘DELETE J’ is configured via the SRCH-GROUP menu. Use the key sequence
to access the “SRCH-GROUP” menu. Use the Õ Ö keys to select the
SRCH-GROUP number between 1 and 9. Ø ten times to display the search environment
parameter of DELETE J.
If bank “J” contains data, the legend “J00” will be displayed, if no data is held in bank “J” the legend
“J --” will be displayed. to delete the contents of bank “J”, this will take a few
sections to action by the CPU. The legend “J --” will be displayed to confirm deletion.
to return to the display prior to accessing the VFO environment menu.
Section 8-7-5, 8-7-6