Instruction manual

12
8. Options
LA400-RCK Extension cables (10m each)
This set of cables allows you to separate the
control (tuning) box from the loop element, by up
to 10m. Conveniently place the loop element as
closely as possible to an open space, such as
window, covered balcony, etc...away from local
electrical noise, for a quieter reception
experience.
MC-600 Impedance matching transformer
Passive impedance matching transformer interface which allows
your LA400 to be connected to any antique receiver with a 600 Ω
antenna terminal. Supported frequency range: 10kHz to 30MHz.
MC-600 has the same isolation feature than the GT-1 accessory
described below.
GT-1 Galvanic isolation transformer
To be connected between the receiver and the LA400 antenna.
Does greatly reduce local noise by breaking the ground loop
effect between antenna and receiver, especially when the
LA400-RCK 10m separation cables are used.
Supported frequency range: 40kHz to 30MHz