User`s manual

Page 12 - AOR HAWK 5000 for Windows
TM
User’s Manual
Choose the serial port to use on your PC from those available (COM1 to
COM4) by clicking on the required one then click on OK to accept or Cancel to
abort. Once you have selected the PC serial port, you can begin to use AOR
Hawk 5000.
Front Panel Push Buttons
A variety of push buttons are provided on the front panel area of the main
window. Most of these are short cuts to the equivalent functions on the front
panel of the SDU5000 unit; some are equivalent to menu options on the AOR
Hawk 5000 package.
The push buttons with equivalent software menu options are described in the
relevant section of this manual. The other push buttons are as follows:
This push button selects maximum hold operation. When
maximum hold is in operation, the SDU5000 only displays the maximum signal
level detected for each part of the spectrum. Press the ESC push button in the
main window’s front panel area to restore normal operation.
This push button sets the level of averaging that is used to
display the data. You can enter the number of video frames that will be
included in “the average” using the following dialog: