User`s manual

Page 16 - AOR HAWK 5000 for Windows
TM
User’s Manual
SETUP MENU OPTIONS
Communications...
This menu option opens the Communications dialog which allows you to select
the PC serial port to use for RS-232 communications with the SDU5000 .
Further details are given in the “Setting Up” subsection of the “GETTING
STARTED” section.
Configuration...
You can select the “configuration” options of the SDU5000 using this option. It
is also available from the CONF push button on the front panel area of the
software. The following dialog is displayed:
Select the communications receiver you are connected to from the “Receiver”
panel. You can select the gain setting and plot mode from the “Gain” and “Plot
mode” panels. Click on OK to accept or Cancel to abort.
NOTE: The software will follow the SDU5000 plot mode using this
dialog, but since the software cannot request the plot mode from the
unit, it may differ on power up. This is a hardware limitation.
Centre Frequency...
The centre frequency is the frequency that appears in the centre of the