Congratulations on your purchase of the AORUS Notebook! EN This Manual will help you to get started with setting up your notebook. For more detailed information, please visit our website at http://www.aorus.com. All specifications are subject to the manufacturer's configuration at the time of shipping and may change without prior notice,written or otherwise. Using AORUS Notebook for the First Time TC SC 4 KR 2 GR 3 FR 1 1 Connect the the power cord to the AC adapter.
EN TC SC KR Switching on the Power After you turn on the notebook for the very first time, do not turn it off until the operating system has been configured. Please note that the volume for the audio will not function until Windows® Setup has completed. GR Booting Up the notebook for the First Time Depending on your configuration, the Microsoft® Windows® Boot Screen may be the first screen that you will see as the notebook starts up.
Your AORUS Notebook Tour 1 2 EN 3 4 1 Webcam Status LED Indicator 2 Webcam 3 Light sensor 4 Microphone 5 TouchPad 6 Battery Indicator Button 7 LED Indicators 5 7 TC SC Press the right button of touchpad while power off, hibernate mode to check the remaining battery power. Right-click to show the remaining power percentage. As shown below, the battery life indicator is available when the laptop is shut down, in stand-by or hibernation.
EN TC 1 2 3 4 5 6 7 SC 8 9 10 11 1 Kensington Lock Slot 2 Mini Display Port 3 HDMI Port 4 USB 2.0 Port 5 Microphone Jack 6 Headphone Jack 7 Speaker 8 Speaker 9 SD Card Reader 10 USB 3.0 Port KR 11 Power Button 1 DC-in Jack 2 Ethernet Port GR 1 FR 2 Warning: DO NOT remove the built-in lithium battery. For any service needs, please contact your local Aorus Authorized Service Center.
Hotkeys EN The computer employs hotkeys or key combinations to access most of the computer’s controls like screen brightness and volume output. To activate hotkeys, press and hold the key before pressing the other key in the hotkey combination. Function Description Fn + F1 Hotkey Sleep Put the computer in Sleep mode. Fn + F2 Wireless LAN Turn the Wireless LAN function ON and OFF. Fn + F3 Brightness Down Decrease the screen brightness.
X3 Operation manual EN X3 equipped with many unique features, providing user an exceptional gaming experiences. Macro key TC X3 features five macro keys and macro group switch, providing users to set their own preference of combinations, capable for switching in between maximum up to 25 sets of macros simultaneously. By using Marco Hub, users can easily access to their own defined recorded macro, and also adjust the macro sets, so the players are always steps ahead in games.
EN Killer LAN Killer LAN can automatically adjust the priority of network transmission, allowing the user to have the best gaming network speed, by effectively reducing ping values and gain sequence control over different softwares that require network packet.
X3 Command & Control EN Command & Control is a software that integrates a list of basic settings to a single interface, providing user a faster and better experience when customization is needed. Hotkey Function Description Camera Turn On or Off Camera. Fan Controller Adjusts fan speed according to user's preference.
EN Brightness Setting Adjust Screen brightness. Wi-Fi Switch Turn ON or OFF Wi-Fi connection. Bluetooth Switch Turn On or Off Bluetooth connection. TC SC Power Plan Setting Adjust the power plan by user usage in order to obtain maximum battery life or performance. External Monitor Setting Switch between the computer screen and the external display video output, or simultaneous display. Font Size Setting Adjust font size. Backlit Keyboard Switch Turn On or Off keyboard backlit.
Macro Hub Instruction EN Welcome to use Macro Hub! Macro Hub makes it much easier for you to control your Macro Key on AORUS X3. You can deal with complex key stroke combination by just one press on macro key, which brings you benefit both in work and game. Before using Macro Hub, please read following guide. 1 Launch Macro Hub TC You can find the shortcut of Macro Hub on desktop. Just double click it.
3 Using Macro Hub 1 EN Set Macro Key to basic function a. Click the G button on the left-top of the keyboard to switch to the Macro Key group you would like to use b. Click the Macro Key function brick c. Double-click the function you would like to us(ex. open browser) in the basic function area. The Macro Hub will ask if you would like to save the configuration. Please press “Yes” to complete the setting. 2 2 TC SC Set Macro Key to custom macro a.
EN 13 1 2 3 TC 8 9 4 5 SC 7 6 12 KR 10 11 d. The overview of macro record panel (you can record your own macro here) GR FR 1. Start recording: Click when you’re about to record the macro 2. Stop recording: Click to stop the record of macro 3. Macro Name: Set the name of this macro 4. Import icon: Set icon for this macro. You can use default icon or upload your own icon 5. Record type: You can choose to record only mouse(or keyboard) movement, or record both.
EN e. Start to record macro: When you click start button, the macro hub will start to record macro. All movement you made(mouse/keyboard) will be shown in the movement list. You can decide to use “pause” key or mouse click on stop button to stop recording based on your record range TC f. Finishing recording: When you have done all movement, click exit button. The macro hub will inquire you if to save the macro.
Setup Your System for RAID 0/1 EN WARNING ●● Please backup your data before you build and run RAID 0/1 on your system. ●● RAID 1 needs two storage drives of the same specification and capacity in your laptop. TC ●● R AID 0 needs two storage drives of the same specification in your laptop. Different capacity is acceptable. 1 • Press F2 when computer starts to Enter BIOS setup utility. • Go to Advanced > SATA configuration. SC 2 • Change "SATA Mode selection" from "AHCI" to "RAID".
System Backup Guide EN WARNING ●● You can backup original recovery image through this application in case of losing by device damage. ●● You can backup original recovery image to USB disk and restore the system if any storage system replacement with the recovery USB disk. ●● B efore you restore the system through the recovery USB disk, please make sure that you have already made the backup of your data. ●● Please DO NOT shut down or un-plug the system when performing backup through recovery USB disk.
Recovery Guide EN System Recovery (Restore your laptop operating system) When something is going wrong with the laptop operating system, the storage of the laptop has a hidden partition containing a full back up image of the operating system that can be used to restore the system to factory default settings. TC Note ˙˙ If the storage has been switched or the partition deleted, the recovery option will no longer be available and a recovery service will be needed.
EN A progress indicator bar will show on the window when the recovery process is running. Please make sure the ACadapter is plugged in and do not turn off the laptop. 4 TC SC Reboot the laptop after the system recovery is complete. 5 KR GR Windows 8.1 Recovery Guide 1 2 FR Turn off and restart the laptop. During the laptop turn on process, press and hold F9 key to launch the tool.
EN 3 Choose “Troubleshoot” to enter the recovery settings. (Also you can choose “Continue” to exit recovery system and continue to Windows 8.1 for files or data backup.) There are two options for system recovery ˙˙Refresh your PC TC You can refresh your laptop to improve the system stability without losing your files. ˙˙ Reset your PC If you want to remove all of your files, you can reset your PC completely. Caution: All personal data and files will be lost.
EN Automatic Repair Fix problems that keep Windows from loading. TC Command Prompt Use the Command Prompt for advanced trobleshooting. UEFI Firmware Settings Change settings in your PC’s UEFI firmware. SC Startup Settings Change Windows Startup behavior. KR Appendix Warranty & Service: Warranty and service and related information please refer to the warranty card or service website as the below link: http://www.aorus.
