User Manual

ManualsBrandsAOYUE ManualsSoldering EquipmentHot Air Soldering Station AOYUE 768 (220 V)

Manufacturer:

AOYUE TONGYI INTERNATIONAL LIMITED

Jishui Industrial Zone, Nantou, Zhongshan City,

Guangdong Province, P.R.China

http://www.aoyue.com

Sold Separately

AIR NOZZLES

Professional Repairing System

INSTRUCTION MANUAL

Thank you for purchasing model Int768 Repairing System.

Please read manual before using the unit.

Keep manual in an accessible place for future reference.

Summary of content (6 pages)

PAGE 1
AIR NOZZLES Sold Separately Professional Repairing System INSTRUCTION MANUAL Thank you for purchasing model Int768 Repairing System. Please read manual before using the unit. Keep manual in an accessible place for future reference. Manufacturer: AOYUE TONGYI INTERNATIONAL LIMITED Jishui Industrial Zone, Nantou, Zhongshan City, Guangdong Province, P.R.China http://www.aoyue.
PAGE 2
REPLACEMENT TIPS Sold Separately TABLE OF CONTENTS Package Inclusion ………………………………..…..… 3 Spare Parts List .…..……………………..…….…………3 Specifications ……………………………..……………. 4 Features …..………………………………….………….. 5 Safety Precaution ……….……………………….……... 5 Assembly and Preparation …………………………….. 6 Operation Guidelines Panel Guide ……………………………… ……………...7 Hot Air Gun …………….………………...………..……..8 Soldering Iron …………………………………...………...9 Dc Power Supply …..………………………..…………...10 Maintenance ……………….………………………..…….
PAGE 3
OPERATING PROCEDURE PACKAGE INCLUSION IV. DC POWER SUPPLY 1. Turn on the power switch. Make sure that the connectors are properly attached. 2. Press the VOLTAGE SUPPLY function button. It will then display the voltage and current supply. 3. Adjust DC voltage regulator knob for desired output voltage. DC voltage output ranges from 1-15 V.
PAGE 4
SPECIFICATIONS OPERATING PROCEDURE II. AUTOMATE HOT AIR REWORKING This is an optional setting. You can set reworking time from 0-9999 seconds then it automatically turns off. MAIN STATION Power Input : Station Dimensions: Weight: available in 110V / 220V 188(w) x 126(h) x 250(d) mm 5.6Kg To activate this function: 1. Set the time by using the button. It is preset at 300 seconds. 2. After preferred automate rework time has been set. Press the AUTOMATE function button to start the countdown.
PAGE 5
OPERATING PROCEDURE FEATURES ◆ I. HOT AIR GUN 1. Be sure that all function buttons are not pressed. 2. Turn on the Power Switch. 3. Press the function switch to turn on hot air reworking HOT AIR GUN function. 4. Set the airflow level. You can adjust to your desired airflow by using the buttons. Airflow range is from 15 – 100. When the airflow is not being adjusted, the display shows the hot air gun real temperature. 5. Set the temperature. Adjust to your preferred hot air temperature, using the buttons.
PAGE 6
ASSEMBLY AND PREPARATION A. PANEL GUIDE Soldering Iron 1. Install solder wire to the solder iron holder. (Figure 1) 1 10 11 2 12 13 3 14 15 4 16 17 5 18 19 20 Figure 1. Soldering Iron stand with solder wire holder 2. Attach the soldering iron cord assembly to the 6-pin output at the 3. 21 6 lower center area of the main unit. Place soldering iron to the soldering iron stand as shown in Figure 1. 7 B.