Datasheet

Specification
APMA/ML-18V
P5109 - Li-ION
Nominal Voltage: 18V
Typical Capacity: 3000mAh
Capacity Minimum / Maximum: 2600mAh / 2950mAh
Standard Charge: 1500mAh
Cell Type/System: Sanyo (Li-Ion) UR18650W 5S2P
Cell Size: 18,5mm x 65mm
Temperaturefuse / PCB safety-protection NTC 20kOhm+Pepi 70°C / PCB = single-cell-protection + short circuit
protection and over-discharge protection about power transistors
Chargingtime with AP Chargers
L1830MS/L2830MS
Charging current 3A max. ca. 50min.
Fast Charge: 3000mAh
Standard Discharge Current: continuous 3A
Maximum Discharge Current:
a:) continuous 10A
b:) continuous 30A
c:) pulse 70A (5sec)
Discharge End Voltage: 12,5V under load
Operation Temp. Standard Charge: 0°C to +40°C
Operation Temp. Fast Charge: 10°C to +50°C
Operation Temp. Discharge: -20°C to +50°C
Operation Temp. Storage Condition: -20°C to + 35°C low humidity and no corrosive gas atmosphere
30-90 days
Operation Temp. Storage Condition: -20°C to + 20°C C low humidity and no corrosive gas
atmosphere
90-365
days
Dimensions (L x H x W): 115 x 62 x 73,5 mm
Cycle Life - at room temperature 700 cycle (charge voltage 4,10V / discharge 10A to 2,7V cut off)
Weight: ca. 600g

Summary of content (1 pages)