User manual

13
Contrast
Select to set contrast levels.
1. Press
to enter.
2. Press
or to adjust contrast. The new setting is previewed onscreen.
3. Press
to confirm or press to exit.
DNR
Select to adjust DNR.
1. Press
to enter.
2. Press
or on the remote control to
select “Off” to disable this function or “Auto” to
active it.
3. Press
to confirm or press to exit.
Note: DNR (Dynamic noise reduction) --- Digital
video is compressed in the compression process, DVD may occur in some parts of the
naked eye can see the video noise, DNR can effectively reduce the static picture for the
(background) on a slight flicker and improve picture stability sex.
TV System
Use it to select the video display resolution.
1. Press
to enter.
2. Press
and on the remote control
to set the TV system, depending on your TV
resolution.
3. Press
to confirm or press to exit.
Note: z By pressing TV SYSTEM button on the remote control, the video output format can
be switched in the following sequence: NTSC Ö PAL Ö 480P Ö 576P Ö 720i Ö
720P Ö 1080i Ö 1080P and so on. If you find the display incorrect, try this method
to get back to standard NTSC or PAL video output, and then configure the video
setup correct.
z NTSC: TV color encoding system for United States, Canada, Japan, Mexico,
Taiwan and so on.
z PAL: TV color encoding system for Europe, South America, India and so on.