User manual

31
Problem Possible Cause Solution
The attached USE
devices are not
visible.
The USB device’s file system
is not supported.
Make sure the file system is FAT
or NTFS.
The media Player
could not connect
your PC via
network.
The network is not detected.
The PC is not detected.
Check your network setting.
Go to Apacer website to
download
TranscodeServer.exe.
Chapter 14 Service and Support
Please contact our local distributor or our customer service center, if you have any
technical problems.
Customer Service Center: http://www.apacer.com
Chapter 15 Product Specifications
Specifications
STORAGE
USB devices USB Flash drive / USB external HDD
File System FAT32 or NTFS
INTERFACE
USB USB 2.0 type A Connector x 2
LAN 10/100 Ethernet Connector x 1
AUDIO/VIDEO INTERFACE
HDMI HDMI connector x 1
Composite output Video + Audio R/L (3.5mm phone jack x 1)
Component Video Y, Pb, Pr (3.5mm phone jack x 1)
MEDIA SUPPORT
Audio MP3, WAV, WMA, LPCM/PCM, AAC, OGG, Dolby Digital AC3
Video MPEG-1 (MPG/DAT), MPEG-2 (AVI/ISO/IFO/MPG/VOB), MPEG-4
(AVI/Xvid/ASP/AVC HD/H.264), WMV, FLV, MKV, RM/RMVB, TS, m2ts,
mts, TP, MJPEG, MOV, VC-1
Photo JPEG, BMP, GIF (not support interlace/animation mode), TIF (Raw