Datasheet

14
Digital Output
1. Press to enter.
2. Press or to select from HDMI
RAW, HDMI LPCM, HDMI LPCM MULTI CH,
SPDIF LPCM, and SPDIF RAW to enable or
disable the function.
3. Press to confirm or press to
exit.
HDMI LPCM: It is the default setting, and provides 2 channels audio output.
HDMI RAM: It is the original bit stream and will provide a better audio output quality.
HDMI LPCM
MULTI CH
It is the original LPCM multi channel audio output.
SPDIF LPCM Select this option to output the digitized analog audio to the SPDIF audio
receiver.
SPDIF RAW Select this option to output multichannel audio.
VIDEO SETUP
Press or on the remote control to
select the Video option. Press to enter.
Aspect Ratio
Use it to select the way videos are displayed.
1. Press to enter.
2. Press and on the remote
control to select from Pan Scan, Letter Box,
or 16:9.
3. Press to confirm or press to
exit.
Pan Scan : Display a wide picture on the entire screen and cuts off the redundant
portions. Select when a standard 4:3 TV is connected.
Letter Box :
Display a wide picture with two black borders on the top and bottom of 4:3
screen. Select when a standard 4:3 TV is connected.