Datasheet

16
TV System
Use it to select the video display resolution.
1. Press to enter.
2. Press and on the remote
control to set the TV system, depending on
your TV resolution.
3. Press to confirm or press to
exit.
Note:  By pressing TV SYSTEM button on the remote control, the video output format can
be switched in the following sequence: HDMI AUTO 

 NTSC 

 PAL 

 480P 


576P 

 720P 

 1080i 

 1080P and so on. If you find the display incorrect, try this
method to get back to standard NTSC or PAL video output, and then configure the
video setup correct.
 NTSC: TV color encoding system for United States, Canada, Japan, Mexico,
Taiwan and so on.
PAL: TV color encoding system for Europe, South America, India and so on.
1080P 24Hz
Use it to select the video display resolution.
If your video file is 1080P 24Hz, suggest to
enable this option. It could provide the better
video display resolution.
Network Setting
Press or on the remote control to
select the Network option. Press to enter, or
press to exit.