Operation Manual

content of a selected channel into the embedded memory. The FM recording
filename has a format of FXXX.WAV. Press the button once again to stop
recording. The Audio Steno can only perform Direct FM Recording for 4~5
hours as this function consumes more power.
USB Flash Drive Mode
z If the Audio Steno is connected to a PC, then 2 “removable disk” devices
will appear in My Computer, wherein the first removable disk is the
embedded flash memory and the second one indicates the card reader.
z When connected to a PC, Audio Steno will get power from the USB port; no
external power is required.
z The following screen indicates the data is being transferred between the
Audio Steno and the PC.
Data Transfer Screen
z Under Windows ME/2000/XP, click on the “Stop USB Mass Storage
Device” icon before removing the device from the USB port.
Warning: Incorrect removal will cause data loss!
Stop USB Mass Storage Device Screen
Format the Audio Steno
Format the Audio Steno if it is not operating properly. Acceptable formats
include FAT 12 and FAT 16. The format FAT 12 is for the 64MB Audio Stenos,
and the format FAT 16 is for the Audio Stenos of 128MB or higher capacities.
It is recommended to use the format program on the enclosed CD to format the
Audio Steno. You can also use the format function provided by Windows to
format the Audio Steno into FAT 12 or FAT 16.
Run the Audio Player ASAP510 program from the Start menu of your
computer, select Firmware Update.