Operator`s manual
14
9 Menu Functions
The Menu screen is accessed by pressing the Accuracy
and Beeper switches together for approximately two
seconds. Menu text will appear in the numeric display
area. The rst line is the menu function. The second line
is the current setting for that function. The remainder
of the LCD will be clear. No elevation information will
be displayed while in the menu screens.
Menu items are selected by scrolling up or down the blue scroll
arrows (▲▼) on the Accuracy and Volume switches.
Menu items are entered by pressing the blue enter arrow
(↲) on the Units switch. Once entered, the current setting
will blink.
To change the current setting, use the blue scroll arrows to scroll
through the options for that function. Once selected, press the
blue enter arrow (Units switch) to conrm selection.
Use the blue scroll arrows to select additional functions.
Once all selections are made, scroll to EXIT, and press the blue
enter arrow to exit the menu. Alternatively, the Power switch can be
used to enter a selection, to back up one step or exit the menu.
SENS - Sensitivity - HI / MD / LO - Selects reception sensitivity
to laser and other light sources.
MD is used for most applications and is default setting.
HI can be used when working with a weak laser beam or if the
beam needs to be picked at very long distances.
NOTE: Refer to the laser's specications for accuracy and
distance information.
LO is used if outside sources are disturbing elevation readings.