MANUAL Champ - 4 Professional quad power amplifier INFO@APART-AUDIO.
Safety First! • • • • • • • • • • • • • • • • • • • • • Caution: hot and sharp surfaces ! This professional device needs to be installed by qualified personnel only. Please check the carton box for any kind of damage on reception of the goods. In case of a damaged carton, please contact your dealer before opening the carton. !!!! Danger !!!! Exposure to extremely high noise levels may cause a permanent hearing loss.
Manual contents 1. Features 2. Inputs and outputs 3. Rack mounting and wiring 4. standalone use 5. Technical specifications 1. Features • • • • • • • • • • Custom designed side mount heatsinks, four discrete class AB amplifiers in a one unit 19” enclosure. Switchable high and low pass filters for easy and troublefree subwoofer/satellite applications. Integrated APC limiter circuitry and clip indication.
2. Inputs and outputs Front panel layout: 2 1 6 3 7 4 8 5 12 13 14 15 9 10 11 16 17 18 19 1) Volume potmeter channel 1: use this potmeter to preset the volume. In case the amplifier has been switched to bridge mode, this potmeter sets the level for bridge operation. 2) Signal led channel 1: this led lights up green when a sufficiently strong signal is present on the first channel, after passing the input level control.
10) Power switch and power led: flip the switch to power on the amplifier. The blue led will light up to indicate that mains power is present. 11) Volume potmeter channel 3: use this potmeter to preset the volume. In case the amplifier has been switched to bridge mode, this potmeter sets the level for bridge operation. 12) Signal led channel 3: this led lights up green when a sufficiently strong signal is present on the first channel, after passing the input level control.
Rear panel layout: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1) Channel 4 unbalanced input on cinch connectors: use the top or bottom cinch connector to apply an unbalanced signal on channel 4. These connectors are wired in parallel, this means you can use the second connector as a signal link connector. 2) Channel 3 unbalanced input on cinch connectors: use the top or bottom cinch connector to apply an unbalanced signal on channel 3.
10. Channel 1 speaker binding post: this connector accepts speaker cable as well as 4 mm banana plugs. Remove the protective cover from the middle of the red/black binding post in case you want to use banana plugs. For bridge mode applications, you MUST use the red binding posts only: channel 1 red plug is bridge mode positive speaker connector. 11. With this switch, you can acivate/deactivate the integrated subwoofer filter circuitry. Standard crossover frequency is lowpass at 100 Hz.
3. Rack mounting and wiring Champ-4 can be mounted in a 19” rack, taking up only 1 rack space. Always allow a good airflow around the amplifier’s front, rear, side, top and bottom. When installing in a rack with multiple audio devices, it is compulsory to leave one rack space between units. Fill the empty rack spaces with meshed blind panels for improved ventilation. Never mount the amplifier in a sealed cabinet, unless adequate forced ventilation is provided.
4. Stand alone use It is possible to integrate Champ-4 in a high quality audio chain. In order to adapt the front panel dimensions to the dimensions of other equipment, it is possible to remove the 19” brackets and handles for an even more sleek and refined look. Remove the two screws marked in red circles and slide off the handles. 9 INFO@APART-AUDIO.
5.
PHYSICAL SPECIFICATIONS: Net dimensions (cm) (W x H x D) 48.3 x 4.4 x 36 Gross dimensions (cm) (W x H x D) 56 x 10 x 55 Net weight 7.5 kg Gross weight 9.0 kg APart-Audio general warranty conditions: APart-Audio warrants this product to be free of defects in material and workmanship for a period of one* year for parts and for a period of one* year for labor from the date of original end-user purchase. This warranty is valid only for the original end-user and cannot be transferred.
ANY SUGGESTION? They are well appreciated and eventually rewarded! Send your ideas or suggestions to suggestions@apart-audio.com Company names, product names, and names of formats etc. are the trademarks or registered trademarks of their respective owners. © 2009 APart-Audio specifications subject to change without notice. CHAMP-4 is developed by Audioprof nv Lanteernhofstraat 90 BE-2100 Deurne BELGIUM 12 WWW.APART-AUDIO.