User manual

Using the ACP & ACPL panel
After installing and connecting the ACP(L) panel to your
APart active speakers, you can switch on the power
switch of your APart active speakers. (use the power
switch at the backside of the speaker set)
With the “Power” button (1) on your ACP(L) you can
now put your active speakers in either “on” mode or
“standby” mode.
With the “level” buttons (2) you can control the volume
of your APart Active speakers through the ACP(L). Note
that the maximum selectable volume level needs to be
selected at the backside of your APart active speaker.
Double click the “level down” button (3) to mute the
system.