User manual

Before you are able to use the inputs from the ACPL,
you need to select this as a source at your APart active
speakers. For example for SDQ5PIR, you can select the
input through the IR remote control.
You can connect a Dynamic microphone to the ACPL by
using the “microphone” jack.6.3 mm (balanced mono
input) (4)
You can connect an MP3 player to the ACPL by using
the “Stereo Line” jack. 3.2 mm stereo mini-jack (unbal-
anced stereo input) (5)
With the button “input switch” (6) you can select the
ACPL input you want to hear.
Note: The selection of the audio input is only selectable
for the inputs from the panel itself. It cannot control
inputs that are connected directly to your Apart active
speaker.
Using the local inputs of the ACPL