Specifications

WWW.APART-AUDIO.COM

Toptypemeans:crossovertypefortheL/Rchannels.Thisparameterislinkedforbothchannels.

Subtypemeans:crossovertypefortheSubchannels

Therearedifferenttypesofcrossovercharacteristicselectable:

OFF->nocrossover,thechannelsworkatfullrange,validforL/Ramplifiersonly.

L-R48->Linkwitz-Riley48dB/octave(default)

L-R24->Linkwitz-Riley24dB/octave

L-R12->Linkwitz-Riley12dB/octave

BUT48->Butterworth48dB/octave

BUT24->Butterworth48dB/octave

FIRST6->Firstorderfilteror6dB/octave

SubfreqandTopfreqmeans:thecrossoverfrequency.Thisisfreelyselectable.

Sublocutmeans:thefrequencywherethe48dB/octavesubsonicfilterwillbeactive.Valid

parametersare:OFFor10to80Hz.FilterslopeisL-R48andcannotbechanged.

Subphase:whensettoOFF,thesubchannelisinphasewiththeL/Rchannels.Whensettothe

“ON”position,subphaseis180°,alsocalledphasereverse.Ifthelowfrequencyresponseof

yoursystemisinsufficient,experimentwiththephasesettingfirst.

FinetuningcanbedoneviatheDELAYmenu.

EQUALIZERONorOFF

BAND:selectband1to4

TYPE:selectequalizertype:HPF,LOSHELF,PEAK,HISHELF,LPF

FREQ:selectequalizerfrequency

GAIN:setequalizergain

Q:setQ-factor

Allequalizerfrequenciescanbefreelyselected.

TheseQ-factorsareselectable:

0.08,0.12,0.18,0.25,0.35,0.50,0.71,1.00,1.41,2.00,2.83,4.00,5.66,8.0,

11.3,16.0

ThehighertheQ-value,themorenarrowthebandwidthoftheequalizer.

IfyouarenotfamiliarwithequalizersettingsandQ-factors,leavetheQ-factortoitsdefault

settingof0.71!

HPFstandsforhighpassfilter:allfrequenciesbelowtheselectedfrequencywillbecut.

LPFstandsforlowpassfilter:allfrequenciesabovetheselectedfrequencywillbecut.

NOTE:withaQ-factorof0.71(default),the-3dBpointequalstheselectedfrequencyforHPF

andLPF.HPFandLPFhaveafixedslopeof12dB/octave.

CROSS-OVER

EQUALIZER