MANUAL CMSQ108 1 INFO@APART-AUDIO.
Introduction Please read this manual carefully before using the product. This will give you the necessary product and installation instructions to assure a seamless installation and non compromised overall sound quality. Thanks for purchasing our APart CMSQ108 speaker. We have put great care and effort in the design in order to bring you high quality sound. The CMSQ108 is an elegant and very natural sounding in-wall/in-ceiling speaker.
• • • • • might be void. Use cable of the right gauge, certainly for long runs. Use cables with clear color indication and maintain polarity throughout the whole system. Avoid loud feedback from microphones, this can damage your speaker. Please check the units condition after unpacking. If the outside of the carton box has been damaged, inform your shipper immediately.
install them close to a CRT screen. Flatscreens, the ideal partners for the CMSQ speakers, are insensitive to magnetic fields. Instead we have invested in solid gold plated speaker wire terminals, a carefully tuned crossover with high quality components, solid steel speaker grille and of course top notch quality drivers. You will hear the difference! Recommended applications • • • • • Multi Room audio systems. Home Theatre systems. Lounges, Bars, Boutiques. Board rooms & Offices.
For hifi setups, mount the speakers between 1/2 and 2/3 of total wall height, for walls up to 3 meters height, and stay at least 50 cm clear of adjacent walls. You can also mount the speakers in a ceiling if necessary. Speaker mounting instructions Recommended minimum installation volume is 4 liters. By using our optional in wall speaker frame/cabinet, the optimum cabinet volume is guaranteed. There is no upper volume limit.
Using the cutout template Note: when making the hole in your mounting panel, double check if there are no cables or any other obstructions behind the mounting panel. Cutting the mounting panel without this check might result in damaged infrastructure or power lines. 1. 2. 4. b 5. a d c 6 WWW.APART-AUDIO.COM 3.
The CMS5BBI built-in box Because we want to make the lives of installers easy APart offers a built-in box for our square CMSQ108 speaker. The box is insulated to prevent resonance and is custom-built. Once again, APart proves to be your one stop solution for all your installed sound projects! 7 INFO@APART-AUDIO.
Connecting the speaker Use the correct polarity when daisy chaining speakers! When a mistake occurs in your daisy chain, it can severely impact speaker performance as there will be audio-cancellation. The daisy chain options are endless and the setup will depend on the capabilities of your amplifier. Make sure when daisy chaining speakers that the total impedance is not lower than the lowest specified impedance of your amplifier.
Specifications Speaker type Recommended amplifier power Rated RMS power Nominal impedance Frequency range Sensitivity in-wall/in-ceiling, square mounting frame, two way hifi. 15 to 120 watts per channel 50 W 8 Ohms 50* – 25000 Hz 87 dB spl (2.83V/1m) Dispersion at 1 kHz, 2 kHz, 4 kHz, 8 kHz 180, 170, 120, 80 Crossover frequency and slope 3000 Hz, 12 dB/oct Bass-mid speaker Tweeter Chassis color Chassis type Grille material Removable grille Fixing type IP classification Dimensions outside H x W 5.
Polar diagrams Polar diagram 1000 Hz Polar diagram 2000 Hz Polar diagram 4000 Hz Polar diagram 8000 Hz 10 WWW.APART-AUDIO.
Technical drawing with measurements Warranty info APart-Audio warrants this product to be free of defects in material and workmanship for a period of one year for parts and for a period of one year for labor from the date of original end-user purchase. This warranty is valid only for the original enduser and cannot be transferred.
ANY SUGGESTION? They are well appreciated and eventually rewarded! Send your ideas or suggestions to suggestions@apart-audio.com Company names, product names, and names of formats etc. are the trademarks or registered trademarks of their respective owners. © 2011 APart-Audio specifications subject to change without notice. developed by Audioprof nv Industriepark Brechtsebaan 8 bus 1 2900 Schoten Belgium 12 WWW.APART-AUDIO.