Extra Information

CONCEPT1 RS232 COMMUNICATION
WWW.APART-AUDIO.COM
[e-mail]
Overview of Attributes
Aribute Descripon
Commands Zone Value*
MULTIZONE Mul Zone
GET, SET No Binary
ZONELINK Zone Link
MSCLVL Music Level
GET, SET,
INC, DEC
1
OFF (-80)
-79 to 0
MICLVL Microphone Level
2
MAXMSCLVL Maximum Music Level
MAXMICLVL Maximum Mic. Level
SELECT Source Selecon
GET, SET No
A, B, C
or D
EQBASS Equalizer Bass
GET, SET
No
-14 to 14
EQTREB Equalizer Treble
No
STANDBY Standby
GET, SET No Binary
AUTOLD Auto Loudness
GET, SET
No
Binary
PAGACT Paging Acve
2
IPGAIN Input Gain
GET, SET No -20 to 14
ECHO Echo
GET, SET No Binary
LF Line feed
BS Back Space
HEADER Header
VALFB Value Feedback
GET, SET
No
Binary
INFO Info
GET /
SOURCENAME Source Name
GET, SET No <String>
SERIAL Serial Number
GET No /
HWVRSN Hardware Version Number
SWVRSN Soware Version Number
RESTORE Restore Factory Sengs
SET No Binary
* The column “Value” describes what range of values need to be given with the SET command
Value “Binary” can be OFF / ON or 0 / 1
Mode
The mode of Concept 1 is determined by MULTIZONE and ZONELINK. If MULTIZONE is OFF, the amplier is working
in stereo mode. If MULTIZONE is ON, the amplier will work in 2 zone mode. If ZONELINK is ON, the music level
of zone 1 and zone 2 are linked. Otherwise, when ZONELINK is OFF, the 2 zones have a separate volume seng.
Since these 2 commands change the behavior of the amplier, it’s recommended only to change them when
the amplier is not in acon (no music present, volume at minimum). If the amplier needs to be congured in
another mode, these are the rst sengs that need to be changed