Operation Manual

Integrated ampliﬁers

Rear panel layout

1. Microphone input: connect your (paging) microphone on this

euroblock connector, connect the signal on +, -, the screen on

GND. Connect the eventual paging contacts between GND and

Z1 (for zone 1) and between GND and/or Z2 (for zone 2). The

input gain can be adjusted with knob 2 between line and mic

level to avoid distortion.

2. Mic input gain control: mic input gain adjust

3. Mic input tone control: adjust the tone of the mic input

between dark and bright

4. Ground connection: connect your safety ground lead or screens

of your shielded input cables on this screw if necessary.

5. Link output: the signal here is a copy of the line A input signal

6. Line A: stereo line RCA connector

7. Line B: stereo line RCA connector

8. Line C: stereo line RCA connector

1 2 3 5

6 8

7 9 1611

12 1413 15 17 18