Specifications

[e-mail]
9
ERROR conditions
Symptom DiSplay Solution
no power no DiSplay replace main fuSe. the fuSe iS locateD inSiDe the unit near
the power Switch. for qualifieD perSonnel only.
no power, unit iS Very hot no DiSplay power off the unit, wait for cool Down anD power on again.
no SounD amp error Switch power off anD on again, if error iS not SolVeD, check
amp fuSeS on main pcb anD replace if neceSSary. for quali-
fieD perSonnel only.
oVerheateD hightemp wait for cool Down, reDuce Volume anD check Speaker
loaDS.
only for concept1t VerSion
no SounD amp error check if the enVironment temerature iS within the operating
range of the unit (0° - 40°c).
If any of these fault conditions occur, please unplug the power cord rst, check your speaker lines,
remove overloads.