MANUAL PMR4000R 1 INFO@APART-AUDIO.
Features The APart PMR4000R is a professional multi source music player with integrated FM RDS tuner, internet radio, UPnP and USB media player, compatible with MP3, WMA, FLAC and WAV audio files. The unit is equipped with analog outputs, optical digital output for the digital media player, wired Ethernet and Wifi 2.4G. The unit can be remote controlled with the included handheld infrared remote control.
Front panel 15 1 2 3 4 5 6 7 8 16 17 18 19 20 9 10 11 12 13 14 1. Power button. Push to power on or off. This button powers off the unit entirely in the off position. The power led will not light up when in the off position. During normal operation, the power led lights up blue, in standby, the led is red. 2. USB port: standard USB port to connect removable media such as USB memory sticks. Some USB memory sticks and external hard disks may not work on this port. This is not a malfunction.
13. FM tune back: press to tune to a previous radio station: the tuner will search down the FM band and stops at the first station with sufficiently strong reception. 14. FM tune forward: press to tune to next station: the tuner will search up the FM band and stops at the first station with sufficiently strong reception. 15. Back button: press to go to the previous menu item. This will have no function if there is no previous menu page.
4. Network cable connector: connect to a normal computer network. For internet radio playback, the network must have an accessible broadband internet connection. The connector has 2 leds for diagnostic purposes: when connected to a network, the green led will stay lit. When data is being transferred, the orange led will blink. 5. Wifi antenna: connect the Wifi antenna here. 6. FM antenna: connect the standard FM antenna wire here.
Network: Connect a standard RJ45 cable from your network router to the unit. W-Lan: For wireless operation, attach the antenna to the „Wi-Fi 2.4G Antenna“ connector at the back of the unit. Your Wifi protection password may be required to access the wireless network. USB port: Connect a standard USB memory stick here, formatted in FAT32 file system. Please note that files and/or folders containing special characters in their names may not be recognized by the unit, and therefore may not be played back.
Information on handling batteries/rechargeable batteries Please adhere to the following information when handling batteries and rechargeable batteries: • Keep batteries out of children’s reach. • Batteries are hazardous waste and do not belong in household waste. • Ensure correct polarity when inserting batteries. • Always remove batteries when the remote control is not in use for longer periods of time. Power supply: Plug in the power cable and connect it to a power receptacle 230V/50-60Hz.
Music server: preparing the UPnP server(s) UPnP technology can run on many media that support IP including ethernet. No special device driver support is necessary. Common network protocols are used instead. The UPnP architecture allows device-to-device networking of personal computers, networked electronic devices and wireless devices. It is a distributed, open architecture protocol based on established standards such as the Internet Protocol Suite (TCP/IP).
Example: The most commonly used UPnP server is Windows Media Player (Version 10 or later). Proceed as follows to set up media file sharing on most Windows 7 machines: 1. Make sure your PC is connected to the network and set it up as a UPnP server. 2. Ensure that the PMR4000R has been turned on and is connected successfully to the same network. 3. Add supported audio files (MP3/WMA/FLAC or WAV) and/or folders you want to share with your PMR4000R to your Windows Media Player’s media library.
Network sharing settings.
Click “Customize” in the field showing the APart PMR4000R to check media streaming settings. Select “Make all of the media in my library available to this device” instead of “Use default settings”. Normally this is optional, but when your media files have been redirected to a server location, or a network connected hard disk (NAS), it may be necessary to select this option. It is possible to access media files and folders present on most so called network drives (NAS).
Connecting PMR4000R to a network: You need a network connection via a wired or wireless router for “Internet radio“ and “UPnP” operation modes. The router must have a broadband internet connection for internet radio operation and to perform software updates. When you select “Internet radio“ or “UPnP” mode, PMR4000R will try to connect to a network. If this is the first time that a connection has been made or previously accessed networks are not accessible, then the “Network Wizard” will start.
• DHCP enable: activates use and switches on the automatic reception of network data. • DHCP disable: deactivates use and carries on with the manual entry of network data. • IP settings: set the IP address and the subnet mask. • Gateway address: set the gateway address. • DNS: set the primary and secondary DNS address. • SSID: set the wireless network identification. • Authentication: set the preferred method of authentication: Open, Pre-shared key (PSK), Wifi protected access (WPA) or WPA2.
appears on the display. When the memory location was already occupied, the unit will overwrite the selected location without further notification. Selecting a preset: briefly press a numeric button on the remote or push “<>” on the unit’s front panel to select a preset. This function is available only if more than one radio stations have been stored in the internal memory. Station information: Press the “INFO“ button repeatedly to browse through diverse information.
your favorites and organize the added stations in folders. These folders and favourite stations will immediately show up on your PMR4000R. To access the added favorites, press the menu button, select “Station List”, “My Favourites”. Now the folders with the added favourite stations you created online will show up on the unit. You can select them via the Menu/Station List/My Favourites. Please note that it is possible to create a new login, with a new access code.
Remote control: the handheld remote control allows you to control all basic features of the unit via infrared. You will also need the remote to store FM radio and internet radio presets. Additionally, you can control the unit’s volume digitally via the remote. Please note that the volume setting will always be set to the max setting after cycling the power or waking up the unit from standby. The maximum analog output level can be preset using the volume knob at the back of the unit.
This function is available only if more than one radio stations have been stored in the internal memory. Station information: Press the “INFO“ button repeatedly to browse through diverse information. The type of information and whether information is displayed all depends on the selected broadcasting station. Note: for improved reception of weak FM radio stations, you can use an amplified indoor or outdoor antenna (available in specialized shops).
Technical specifications USB/UPnP Supported audio codecs USB memory file system USB memory capacity S/N ratio THD Frequency range MP3 32-320 kbps and variable bitrate, WMA, FLAC, WAV, ID3 tags support FAT, FAT32 up to 128GB >90dB <0.05% 20Hz - 20KHz FM tuner tuning range Nr of presets Sensitivity (26dB S/N) @ 75Ω unbalanced Channel selectivity (67.5KHz) Tuning step size Audio S/N ratio FM Audio bandwith +/-1.5dB THD Stereo separation 87.5 - 108MHz 10 1.0µV 40dB 50KHz 50dB 30 - 15KHz <0.
Power consumption standby Adjustable audio output level Output impedance Digital output Accessories supplied Remote control battery Operating temperature Relative humidity Dimensions Weight 1W 0 to 1VRMS less than 1KΩ at max setting Toslink® SPDIF format 16BIT/44.1KHz Mains power cable, IR remote control unit, Wifi antenna, FM antenna wire 2 pcs type AAA type LR03 10-40°C 10 to 80% non-condensing LxWxH: 484 (430)x325 (300) x44 mm 3850g 19 INFO@APART-AUDIO.
ANY SUGGESTION? They are well appreciated and eventually rewarded! Send your ideas or suggestions to suggestions@apart-audio.com Warranty info APart-Audio warrants this product to be free of defects in material and workmanship for a period of one year for parts and for a period of one year for labor from the date of original end-user purchase. This warranty is valid only for the original end-user and cannot be transferred.