User manual

Smart-UPS C 1000/1500/2000/3000 VA 120/230 Vac Rack-Mount 2U 3
Front panel features
Installation



UPS input
Circuit breaker/Overload protection
Chassis ground screw



Outlets
USB port
Serial data port
2000 VA 230 Vac 3000 VA 230 Vac

Online/On Battery LED

POWER ON/OFF button

120 Vac models only:
Site Wiring Fault/System Fault LED

Display interface

DISPLAY button

MUTE button
CAUTION
DAMAGE TO EQUIPMENT ORPERSONNEL
• The equipment is heavy. Always practice safe lifting techniques adequate for the weight of the equipment.
• The combined weight of the UPS and the battery is heavy. Remove the battery before installing the UPS in a rack.
Failure to follow these instructions can result in equipment damage and minor or moderate injury
CAUTION
DAMAGE TO EQUIPMENT
• When installing equipment in a rack, always install peripheral equipment at the bottom of the rack.
• The UPS should always be installed above peripheral equipment in rack or stack configurations.
• Always connect the UPS to a grounded outlet.
Failure to follow these instructions can result in equipment damage
su0644f
su0644g
su0740a