NetShelter Fan Tray Inventory Fan tray Power cord Tools required (not provided) #2 Phillips screwdriver Install the fan tray 1. Remove four screws and blanking plate from the cabinet, and save screws for reuse.
. Install the fan tray, and secure it using the previously removed screws. Position cord outlet towards the front of the cabinet. Note 3. Open the cabinet door, and insert the power cord into the receptacle on the fan tray. 4. Install fan tray only on a circuit that has an circuit protector.
Models The NetShelter enclosure’s roof fan tray is available in the following models: • AR8206BLK Wall-Mount Fan Tray—120 VAC Black • AR8207BLK Wall Mount Fan Tray—230 VAC Black The Wall-Mount Fan Tray is for use with APC NetSHelter Wall-Mount enclosures only. Note Electrical rating AR8206BLK Input Voltage 120VAC Frequency Current Noise Air-flow † 50 Hz .035 A 48 dBA 220 cfm 60 Hz .030 A 48 dBA 220 cfm Operating Voltage Range 102–138 VAC AR8207BLK 230 VAC 50 Hz 0.
APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests. – www.apc.com (Corporate Headquarters) Connect to localized APC Web sites for specific countries, each of which provides customer support information. – www.apc.com/support/ Global support searching APC Knowledge Base and using e-support.
