manual

Automatic Floor Pressurization Sensor for Uniflair CW — Installation 3
Attaching the controller box
Note: The mounting location of the AFPS controller varies per Uniflair CW unit model.
1. Determine the mounting location on the unit bracket. Align the mounting bracket with the unit
bracket, and fasten with a screwdriver.
2. Using a standard screwdriver, remove the front cover and rear tabs from the AFPS controller.
3. Using a Phillips screwdriver, attach the AFPS controller to the mounting bracket using the four
screws provided.
Mounting bracket
AFPS controller
Installation location
for AFPS controller
Unit bracket