manual

Automatic Floor Pressurization Sensor for Uniflair CW — Installation 5
Note: If the unit is not in the air-conditioned room, the tubing can be installed using the wall
mounting bracket provided with the kit.
To mount the above-floor pressure sensor head to a wall:
1. After determining an appropriate location for the sensor, drill a hole through the wall and mount
the sensor bracket.
2. Route the tubing behind the wall and through the hole, then attach to the sensor.
Note: Ensure that the wall-mounted sensor is installed away from direct airflow.
WARNING
HAZARD TO EQUIPMENT OR PERSONNEL
Verify that the area behind the wall is free of electrical wires or piping before drilling holes
into the wall.
Failure to follow these instructions can result in death, serious injury, or equipment
damage.
Wall-mounted sensor