Installation manual

Uniflair LE Accessories Manual26
NOTE: The password is found inside the envelope attached to the manual. If the password has been
changed, enter the new password instead.
5. Press ENTER.
6. Using the UP or DOWN key, select HARDWARE SETTINGS and press ENTER.
7. Navigate to the ON/OFF MODE screen.
8. Press ENTER until the cursor is positioned on MOTORIZED DAMPER.
9. Select Yes and press ENTER.
10.The damper default opening time 120 seconds. Adjust if required.
11. Press ENTER to move the cursor to the top-left portion of the display.
12.To exit, press the ESC key and navigate to the main screen.
Using the touchscreen display
Path: Main > Configuration > Unit > Digital Inputs
1. Turn on the power to the unit and wait for the touchscreen to display.
2. Set the following configurations:
NOTE: Settings may appear on a different screen.
Motorized Damper: Enabled
Motorized Damper Opening Time: 120 seconds (suggested setting)
Motorized Damper Output Contract Normal State: Normally Open
3. Press the Home button to return to the main screen.
Use the direction reversal selector located on the servomotor if the rotation is incorrect.
ON/OFF MODE:
Via Input Contact: N
Only Via Serial: N
Motorized Damper: Y
Opening Time: 120
Mot. Damper Output: DO5
Output Contact: N.O.
NOTE: These two settings are
not applicable.
na4652a
DIRECTION
REVERSAL
SELECTOR