Installation manual

Uniflair LE Accessories Manual78
NOTE: Some FTP clients do not use the request from pCOWeb to open the user memory for "httpadmin" (/usr/
local/root/flash/http/), instead they show the contents of the root position. The user needs to manually go to /
usr/local/root/flash/http/.
5. If there are existing files on the pCOWeb card, you will be prompted to overwrite the existing files.
Select OK to overwrite.
6. Close FileZilla after the file transfer is complete.
Accessing custom HTML pages
Open Internet Explorer and go to address 172.16.0.1. A personalized page appears on the screen, depending
on the type of selected unit.
• The page features a photo on the left-hand side of the selected unit.
• A “Status” column indicates the operation mode on a Web page. Green indicates operational status.
Gray indicates the item is not being used. In the event of an alarm state, a red indicator illuminates (if
unit has a cold water valve, the opening value of the valve itself is also shown).
• An “Alarms” column indicates the description of any alarms that may be present. It should be noted that
in order to reset the alarms, it is necessary to click RESET.
• A “Parameters” column indicates the setpoints and the relative differentials of the various parameters
and the possibility of modifying them.
Resetting the system after customizing the HTML pages
1. Go to the Web Administrator reserved area.
2. Enter the Default Username: admin
3. Enter the Default Password: fadmin
4. Select REBOOT on the left side of the screen.