Installation manual

Uniflair LE Accessories Manual80
LON NETWORK
PCO10000F0 LonWorks
®
pCO system serial card (ACAC76124)
NOTE: All LON cards are programed at the factory.
Electrical damage on the electronic components usually occurs because of electrostatic discharges caused by
operator improper handling. When handling these components, take the following precautions:
• Before handling any electronic component or card, ground the card.
• Keep the components inside their original package as long as possible. If necessary, take the main
board from a package and put it into an anti-static package without touching both sides of the board with
your hands.
• Avoid plastic bags and polystyrene.
• Avoid handing a card from one operator to another, to minimize electrostatic induction and discharges.
The PCO10000F0 and PCO10001F0 cards are used with the pCO electronic controller interface and the
LonWorks
®
TP/FT-10 network.
Inventory
Installation
Item Description Quantity

PCO10000F0 1
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Turn off all power supplying this equipment before working on the equipment. All electrical
work must be performed by licensed electricians. Practice Lockout/Tagout procedures.
Do not wear jewelry when working with electrical equipment.
Failure to follow these instructions will result in death or serious injury.
na4486a