User manual

InRow RC Installation24
5. Position the insulated chilled water
supply pipe

in the equipment.
Mount the gasket

and connect
the pipe to the union. Tighten the
union to 20 Nm (14.8 ft-lb).
6. Insulate the joint with the provided
insulation (not shown).
7. Reinstall the air filter bracket

.
8. Reinstall the rear condensate drain
pan bracket

and the air filters.
9. Connect the water supply pipe

to the field-installed water supply

using the gasket

saved from
step 5, union end

, and union nut

.