User manual

InRow RC Installation2
Inspecting the Equipment
Your APC InRo w R C Fu ll R ack air con ditio ner has been tested and inspected for quality assurance
before shipment from APC. Carefully inspect both the exterior and interior of the equipment
immediately upon receipt to ensure that the equipment has not been damaged during transit.
Ver if y tha t all p art s or der ed we re re ce ive d as sp eci fied and that the equipment is the correct type, size
and voltage.
Filing a claim. If damage is identified on receipt of the equipment, note the damage on the bill of lading
and file a damage claim with the shipping company. Contact APC Worldwide Customer Support at one
of the numbers listed on the back page of this manual for information on how to file a claim with the
shipping company. The shipping claim must be filed at the receiving end of the delivery.
Note: In case of shipping damage, do not operate the equipment. Keep all packaging for
inspection by the shipping company and contact APC.
Storing the Equipment Before Installation
If the equipment will not be installed immediately, store it in a safe place, protected from the weather.
Moving the Equipment
Moving the equipment to its final location
The recommended tools for moving the equipment while it is still on the pallet include the following:
Note: The equipment can be rolled to its final location using its casters if the floor is smooth
and clean.
CAUTION
DAMAGE FROM EXPOSURE
Leaving the equipment uncovered and exposed to possible damage from the environment
will void the factory warranty.
Failure to follow these instructions can result in equipment damage.
Pallet jack Forklift