Brochure

19Rack ATS AP44xx Installation and Quick Start
Configure voltage transfer range through the web interface
1. Click Configuration, click ATS, and then click Frequency/Voltage.
2. Type the Line VRMS and desired Wide, Medium, and Narrow ranges into the appropriate fields.
3. Under Voltage Transfer Range, click Wide, Medium, or Narrow.
4. Click Apply to save or Cancel to leave the page without saving.
Configure voltage transfer range through the CLI
• To set the voltage transfer range to Narrow, Medium, or Wide: type vXferRange Narrow,
vXferRange Medium, or vXferRange Wide, and then press
ENTER.
• To change the Narrow voltage transfer range, type vNarrowLmt NarrowTransferRange,
and then press
ENTER.
• To change the Medium voltage transfer range, type vMediumLmt MediumTransferRange,
and then press
ENTER.
• To change the Wide voltage transfer range, type vWideLmt WideTransferRange, and then
press
ENTER.
NOTE: For any TransferRange value, enter a whole number within the configurable range for your
ATS.