User Manual

Rack ATS AP44xx User Manual108
Path: Configuration > General > Date /Time > Daylight Saving
Daylight Saving Time (DST) is disabled by default. You can enable traditional United States DST, or
enable and configure a customized daylight saving time to match how Daylight Saving Time is
implemented in your local area.
When customizing DST, the system puts the clock forward by an hour when the time and date you
specify under Start is reached, and puts the clock back an hour when the time and date you specify
under End is reached.
• If your local DST always starts or ends on the fourth occurrence of a specific weekday of a month
(e.g., the fourth Sunday), choose Fourth/Last. If a fifth Sunday occurs in that month, you should
still choose Fourth/Last.
• If your local DST always starts or ends on the last occurrence of a specific weekday of a month,
whether it is the fourth or the fifth occurrence, choose Fifth/Last.
Create and import settings with the config file
Path: Configuration > General > User Config File
Use the settings from one ATS to configure another. Retrieve the configuration file (config.ini) from the
configured ATS, customize that file (e.g., change the IP address), and upload the customized file to the
new ATS. The file name can be up to 64 characters, and must have the .ini suffix.
To retrieve and customize the file of a configured ATS, see “How to Export Configuration Settings” on
page 118. Instead of uploading the file to one ATS, you can export the file to multiple ATS units by using
an FTP or SCP script.
Configure links
Path: Configuration > General > Quick Links
View and change the URL links displayed at the bottom left of each page of the interface.
By default, these links access the following Web pages:
• Link 1: The home page of the APC by Schneider Electric website.
• Link 2: Demonstrations of APC by Schneider Electric web-enabled products.
• Link 3: Information on APC by Schneider Electric Remote Monitoring Service.
Status Reports the progress of the upload.
• No configuration file uploaded: The ATS has not been configured with a conf ig.ini file.
• Configuration file successfully uploaded: The ATS has been configured with a
config.ini
file. You may need to refresh the page to see this message.
NOTE: The upload succeeds even if the file contains errors, but a system event reports the
errors in the event log.
Upload Browse to the customized file and upload it so that the current ATS can use it to set its own
configuration.
Download Allows the download of the
config.ini file directly through the Web browser to your computer.