User Manual

Rack ATS AP44xx User Manual110
Test Syslog servers
Path: Configuration > Logs > Syslog > Test
Send a test message to the Syslog servers (configured through the “Syslog servers” page). The result
will be sent to all configured Syslog servers.
Select a severity to assign to the test message and then define the test message. Format the message
to consist of the event type (for example, APC, System, or Device) followed by a colon, a space, and the
event text. The message can have a maximum of 50 characters.
• The priority (PRI): the Syslog priority assigned to the message event, and the facility code of
messages sent by the ATS.
• The Header: a time stamp and the IP address of the ATS.
• The message (MSG) part.
• The TAG field, followed by a colon and space, identifies the event type.
• The CONTENT field is the event text, followed (optionally) by a space and the event code.
Example: APC: Test Syslog is valid.