User Manual

Rack ATS AP44xx User Manual18

About the Main Screen

The following screen is displayed when you log on to the CLI of a Rack ATS.

• Two fields identify the operating system (AOS) and application (APP) firmware versions. The

application firmware name identifies the type of device that connects to the network (for example,

a Rack ATS).

Network Management Card AOS vx.x.x

ATS4g APP vx.x.x

• Three fields identify the system name, contact person, and location of the Rack ATS.

Name : Test Lab

Contact : Don Ad ams

Location : Building 3

• An Up Time field reports how long the Rack ATS Management Interface has been running since it

was last turned on or reset.

Up Time: 0 Days, 21 Hours, 21 Minutes

• Two fields identify when you logged in, by date and time.

Date: 11/2/2018

Time: 09:06:45

• The User field identifies whether you logged in through the Super User, Administrator, Device

User, Read-Only, or Network-Only account.

User: Administrator

Schneider Electric Network Management Card AOS vx.x.x

--------------------------------------------------------------------------

Name : Test Lab Date : 11/02/2018

Contact : Don Adams Time : 09:06:45

Location : Building 3 User : Administrator

Up Time : 0 Days, 21 Hours, 21 Minutes Stat : P+ N4+ N6+ A+

Type ? For command listing

Use tcpip for IP address (-i), subnet (-s), and gateway (-g)

apc>