User Manual

Rack ATS AP44xx User Manual70
Web UI
To access the Web UI on Windows
®
operating systems, use Microsoft
®
Internet Explorer
®
(IE) 8.x or
higher (with compatibility view turned on), or the latest release of Microsoft Edge
®
.
To access the Web UI on any operating system, use the latest releases of Mozilla Firefox
®
, or
Google Chrome
®
. Other commonly available browsers also may work but have not been fully tested by
APC by Schneider Electric.
The ATS cannot work with a proxy server. Before accessing the Web UI of the ATS, do one of the
following:
• Configure the browser to disable the use of a proxy server for your ATS.
• Configure the proxy server so that it does not proxy the specific IP address of your ATS.
Log on to the Web UI
To access the Web UI and configure the security settings of your unit on the network:
1. Type the DNS name or IP address of the Rack ATS in the Web browser’s URL address field and
press
ENTER.
2. Enter the user name and password. (By default, both values are apc for the Super User and
Administrator. The Super User, or an Administrator created by the Super User, should define
the user name, password, and account characteristics for other users).
NOTE: If you are using HTTPS (SSL/TLS) as your access protocol, your login credentials are compared
with information in a server certificate. If the certificate was created with the Security Wizard, and an IP
address was specified as the common name in the certificate, you must use an IP address to log on to
the Rack ATS.
If a DNS name was specified as the common name on the certificate, you must use a DNS name to log
on.