User Manual

71Rack ATS AP44xx User Manual

URL address formats

When you specify a non-default Web server port in Internet Explorer, you must include http:// or

https:// in the URL.

Common browser error messages at log on

URL format examples

• For a DNS name of Web1:

– http://Web1 if HTTP is your access mode

– https://Web1 if HTTPS (HTTP with SSL/TLS) is your access mode

• For a System IP address of 139.225.6.133 and the default Web server port (80):

– http://139.225.6.133 if HTTP is your access mode

– https://139.225.6.133 if HTTPS (HTTP with SSL/TLS) is your access mode

• For a System IP address of 139.225.6.133 and a non-default Web server port (5000):

– http://139.225.6.133:5000 if HTTP is your access mode

– https://139.225.6.133:5000 if HTTPS (HTTP with SSL/TLS) is your access mode

• For a System IPv6 address of 2001:db8:1::2c0:b7ff:fe00:1100 and a non-default Web server

port (5000):

– http://[2001:db8:1::2c0:b7ff:fe00:1100]:5000 if HTTP is your access mode

– https://[2001:db8:1::2c0:b7fSf:fe00:1100]:5000 if HTTP is your access mode

Web UI Features

Read the following to familiarize yourself with basic Web UI features for your Rack ATS.

Tabs

The following tabs are available:

• Home: Appears when you log on. View active alarms, the load status of the Rack ATS, and the

most recent Rack ATS events. For more information, see “Home Tab” on page 73.

NOTE: Home is the default tab when you log on. To change the login page, go to the desired

• Status: Gives the user the status of the ATS and Network. The ATS tab covers the status of

Alarms, Device, Unit, Load, and Measurement. The Network tab covers just the Network. For

more information, see “Status Tab” on page 74.

• Control: The Control tab covers Security and Network. Much more information is covered

under these tabs and will be described under “Control Tab” on page 77.

• Configuration: The Configuration tab covers ATS, Security, Network, Notification, General

and Logs. Much more information is covered under each of these tabs and will be under

“Configuration Tab” on page 78.

• Tests: The Tests tab covers ATS and Network. The ATS tab covers LCD Blink and the Network

tab covers LED Blink. Both will be further described under “Tests Tab” on page 111.

• Logs: The Logs section covers Event, Data and Firewall. The Event and Data tabs cover more

information which will be further discussed under “Logs Tab” on page 112.

• About: The

About section covers ATS, Network, and Support, which will be further discussed

under “About Tab” on page 117.

Error Message Browser Cause of the Error

“This page cannot be displayed.” Internet

Explorer

Web access is disabled, or

the URL was not correct.

“Unable to connect.” Firefox