User Manual

113Rack ATS AP44xx User Manual
Create and import settings with the config file
Path: Configuration > General > User Config File
Use the settings from one ATS to configure another. Retrieve the configuration file (config.ini) from the
configured ATS, customize that file (e.g., change the IP address), and upload the customized file to the
new ATS. The file name can be up to 64 characters, and must have the .ini suffix.
To retrieve and customize the file of a configured ATS, see “How to Export Configuration Settings” on
page 123. Instead of uploading the file to one ATS, you can export the file to multiple ATS units by using
an FTP or SCP script.
Configure links
Path: Configuration > General > Quick Links
View and change the URL links displayed at the bottom left of each page of the interface.
By default, these links access the following Web pages:
Link 1: The home page of the
APC by Schneider Electric website.
Link 2: Demonstrations of
APC by Schneider Electric web-enabled products.
Link 3: Information on
EcoStruxure IT.
Configure Logs
Identify Syslog servers
Path: Configuration > Logs > Syslog > Servers
Click Add Server to configure a new Syslog server.
Syslog Server: Uses IPv4/ IPv6 addresses or host names to identify from one to four servers to receive
Syslog messages sent by the ATS.
Port: The port that the ATS will use to send Syslog messages. The default UDP port assigned to
Syslog is 514.
Language: Select the language for any Syslog messages.
Protocol: Select either UDP or TCP.
Click Apply to save or Cancel to leave without saving.
Status Reports the progress of the upload.
No configuration file uploaded: The ATS has not been configured with a config.in i file.
Configuration file successfully uploaded: The ATS has been configured with a config.ini
file. You may need to refresh the page to see this message.
NOTE: The upload succeeds even if the file contains errors, but a system event reports the
errors in the event log.
Upload Browse to the customized file and upload it so that the current ATS can use it to set its own
configuration.
Download Allows the download of the
config.ini file directly through the Web browser to your computer.