User Manual

Rack ATS AP44xx User Manual130
Verifying Upgrades and Updates
Verify the success or failure of the transfer
To verify whether a firmware upgrade succeeded, use the xferStatus command in the CLI to view the
last transfer result, or use an SNMP GET to the mfiletransferStatusLastTransferResult OID.
Last Transfer Result codes
Possible transfer errors include the TFTP or FTP server not being found, or the server refusing access,
the server not finding or not recognizing the transfer file, or a corrupt transfer file.
Verify the version numbers of installed firmware
Path: About > Network
Use the Web UI to verify the versions of the upgraded firmware modules. You could also use an SNMP
GET to the MIB II sysDescr OID. In the CLI, use the about command.
Code Description
Successful The file transfer was successful.
Result not
available
There are no recorded file transfers.
Failure unknown The last file transfer failed for an unknown reason.
Server
inaccessible
The TFTP or FTP server could not be found on the network.
Server access
denied
The TFTP or FTP server denied access.
File not found The TFTP or FTP server could not locate the requested file.
File type unknown The file was downloaded but the contents were not recognized.
File corrupt The file was downloaded but at least one Cyclical Redundancy Check (CRC)
failed.