User Manual

39Rack ATS AP44xx User Manual
ftp
Access: Super User, Administrator
Description: Get/set the FTP configuration data,
NOTE: The system will reboot if any configuration is changed.
Parameters:
Example: To change the TCP/IP port:
apc> ftp -p 5001
E000: Success
Reboot required for change to take effect.
apc> ftp
E000: Success
Service: Enabled
Ftp Port: 5001
apc> ftp -p 21
E000: Success
Reboot required for change to take effect
Error Message: E000, E102
help
See “? or help” on page 24.
lang
Access: Super User, Administrator, Device User, Read Only
Description: Displays the language in use.
Parameters: None
Example:
apc> lang
E000: Success
Languages
enUs - English
Error Message: None
Option Argument Description
-p <port number> Define the TCP/IP port that the FTP server uses to communicate with
the Rack ATS (21 by default). The FTP server uses both the specified
port and the port one number lower than the specified port. Valid
values are 21 and 5000-32768.
-S <enable | disable> Configure access to the FTP server.